AXION 950-920

400 hp. For real.

When massive pulling power joins forces with maximum user-friendliness to deliver unrivalled versatility and performance – you are sitting in the AXION 900.

AXION 950-920

400 hp. For real.

When massive pulling power joins forces with maximum user-friendliness to deliver unrivalled versatility and performance – you are sitting in the AXION 900.

Hydraulics + PTO. Use all 400 hp. For real.

AXION 900
AXION 900

Excellent hydraulics.

The AXION 900 has a load sensing hydraulic system with flow volumes of 150 l/min or 220 l/min. It has up to six electronic spool valves at the rear and a maximum of two for front mounting. All spool valves have time and volume control and are suitable for continuous flow volumes during non-stop operation.

The hydraulics are controlled by proportional rocker switches in the armrest, the ELECTROPILOT or the CMOTION. One spool valve can be assigned to the function buttons on the CMOTION.

External controls at the rear and on the front linkage can also be assigned to any spool valve.

AXION 900
AXION 900
AXION 900

Pressure-free connections and no mess.

All the hydraulic couplings at the rear of the AXION 900 have release levers, so they can be connected and disconnected even under pressure. The coloured + / – markings on the inlet and outlet sides make it easier to attach implements correctly. Oil leakage lines keep the area around the spool valves free of oil.

Power-beyond connections are provided at the rear for implements which have their own spool valves. The advantages of this are as follows:

  • Hydraulic oil is supplied to the attached implement as required
  • Large line cross-sections and non-pressurised return flow reduce power losses
  • Fixed mounting plate with couplers for smooth connection between tractor and attached implement
  • Large flat couplings minimise oil heating and prevent oil losses during coupling

AXION 900

Standing start.

The AXION 900 transfers its full power from a standing start and at low forward speeds.

In ECO mode over 90% of maximum engine power (e.g. 385 hp in the AXION 950) can be transmitted via the PTO shaft, enabling even heavy implements to be operated at a reduced engine speed.

Rotational speeds:

  • 1,000 rpm ECO at 1,600 engine rpm
  • 540 rpm ECO at 1,450 engine rpm

In 1,000 ECO mode the engine can operate at the optimum engine speed. Four bolt-on PTO stubs ensure that the AXION 900 can be adapted to any implement.